Compatible with Windows 10 / 11 — 64-bit
General Overview
Dumps Advanced is a professional solution dedicated to the management, cataloguing, viewing, and editing of electronic dumps.
The software is intended for workshops, automotive professionals, EEPROM / FLASH / MAP specialists, and more broadly, any organization wishing to centralize its technical files in a clear and usable database.
Getting Started
After signing in on a fresh installation, the Getting Started panel offers two ways to begin. Choose the path that suits your files or click Later to return to the main list. You can find these steps in HELP / GUIDE.
Start with new dumps
- In the main window, click CREATE DUMP. Enter the record details and add the dump files.
- Click Validate, then Yes in the save confirmation.
- If the save mode prompt appears, choose Copy to repository to put the files in the main repository. See sections 2.2 and 4.
I already have dump folders
- Open USER REPOSITORIES. Click Add Folder… and select the folder containing your dumps.
- The scan starts automatically. Review the results, then confirm adding the dumps to the catalog using the Index button that shows the number of dumps to add. The files stay in their original locations. See section 2.4.
You can use both paths on the same workstation. New records and indexed records appear together in the main list.
1. Installation
1.1 Installation Recommendation
To avoid certain limitations related to Windows permissions, it is recommended to install the software at the root of a drive, for example:
C:\DumpsAdvanced
D:\DumpsAdvanced
Installation in Program Files is still possible, but depending on the workstation configuration, it may result in less stable operation.
1.2 Important Folders After Installation
data→ configuration files and internal datalogs→ execution logs and historydocs→ user documentation
2. Storage and User Repositories
2.1 Choose the Right Location
- Use User Repositories to reference dumps that already exist on a local drive, a network share or an external drive. Files stay in their original locations (section 2.4).
- Main repository receives the files copied when you save a dump in a copy mode (section 2.2).
- Secondary repository receives an additional copy according to the configured rule (section 2.3).
- Monitored folder (Dossier surveillé) receives files awaiting import. Import Watch detects them and Dump Deposit opens the import queue (section 5).
- Storage / Offline uses a local staging folder and a network destination to synchronize dumps between workstations (section 2.5).
2.2 Main Repository and Save Modes
Set the main repository folder in General Settings → General → Main repository → Repository folder. For example, use C:\DUMPS to keep copies on this PC.
Use General Settings → General → Dump storage → Default save mode to choose what happens to files when a dump is saved.
-
Ask each time
Choose the save mode when you confirm. -
Keep files at their original location
Files stay where they are. To stop future copies to the main repository, select this mode and click Apply. -
Copy to repository
Files are copied to the software’s main repository. -
Copy + keep original
Files are copied to the main repository and their original paths are also retained. -
Work offline + sync to storage Saves the batch in local staging and synchronizes it with network storage. See section 2.5 for setup.
Changing the default mode or the main repository folder preserves the paths of existing records. To update a file link on an indexed record, follow the steps in section 4.3. If you request a copy before setting the main repository, the application asks you to select a folder.
Why Some Folder Names End in (2) or (3)
When a folder with the same name already exists, DumpsAdvanced adds a number such as Folder name (2) to keep both sets of files. This can happen when creating, copying or migrating a dump. If several similar folders have these suffixes, check their contents before deleting any of them.
2.3 Secondary Repository
In General Settings → General → Dump storage, set Secondary repository and choose a Secondary repository rule.
- Disabled makes no secondary copy.
- Always copy makes an additional copy in the secondary repository.
- Copy if source is outside the main repository makes an additional copy when the source is outside the main repository.
2.4 User Repositories
User Repositories adds references to dumps already present in your folders. The original files stay where they are. To open an indexed file, your workstation needs access to its location.
The window opens on the User Repositories tab. It also includes Referenced Dumps, Report, and Move to a New PC.
Index an Existing Folder
You can organize your folders by year, manufacturer or any other useful category.
\\CUSTOMER-NAS\Archives
├── 2025
├── 2026
├── BMW
├── Peugeot
└── Renault
- Open User Repositories from the sidebar, then click Add Folder….
- Select the folder in the Windows picker. To index a single year, select that year’s folder directly.
- The scan starts automatically. A panel under Source Folders, above the table, shows the progress bar and the Cancel button. The results show the folder name and separate counts for new dumps, paths already indexed, exact duplicates, and folders to review, when present. Hover over the summary to see the full path.
- To confirm the new dumps, click the button showing the count, for example Index 5 dumps. When Review folders… is available, use it to check matches with existing indexed records. Click Cancel to dismiss a pending action before confirming it. If the folder is absent from the list and the scan finds neither new dumps nor duplicates, use Remember folder to add the source.
- The window stays on User Repositories. New records carry the [Indexed] prefix. Open Referenced Dumps to see their original paths or Report to review the results.
If the folder is already indexed and there is nothing to add, the panel shows a message and selects the source again in the table. Click See report for details or Close message to hide the panel.
To reference older dumps in the main repository that are missing from the catalog, open User Repositories → Add Folder…, then select the repository folder set in General Settings → General.
Handling Duplicates in a Source
The scan compares all recognized binary files in each dump folder. A folder is an exact match when both folders contain the same set of distinct binary contents. File and folder names and the number of copies of each content can differ. For example, seven binary files containing A, A, B, B, B, C, C match three files containing A, B, C. The scan leaves all files in place.
The report identifies matches with existing records as Dump already indexed and matches between folders in this scan as Dump in the same scanned folder. It also reports differences in associated text files such as INFOS.txt. Standard indexing skips exact duplicates. To create separate records for the confirmed copies in this scan, click Index anyway in Report and confirm. It also indexes new dumps still missing from the catalog and skips already indexed paths. All files stay in place.
Read the Report
At the top of Report, Source folder shows the full path that was scanned. The scan summary shows the counts of new dumps, already indexed paths, exact duplicates and folders to review when applicable. After indexing, the summary shows how many dumps were added or already indexed, along with any duplicates skipped or errors encountered.
Under Binary file inventory by folder, the default view shows one summary line per folder. The first folder in the example shows 7 binary files · 3 distinct contents · 4 identical copies. For multiple folders, Totals summed across folders adds the counts from each folder. The same binary content counts once in each folder where it appears. Issues such as Unreadable file, Empty file and File changed during scan appear under the affected folder with the path. These issues make the content check incomplete. Eligible folders can still be indexed.
The Show file details checkbox appears when the report has file details to display. Select it to see file names or paths relative to each folder and groups listed under Copies identical to. Clear the checkbox to return to the folder summaries.
Relink a Renamed or Moved Folder
For a renamed or moved folder, choose its new location using Add Folder…. Review folders… appears in the scan results when the distinct binary contents match an existing indexed record. When the previous folder can no longer be found, a matching saved fingerprint can identify it. Matches only between folders in the current scan appear in Report.
- Click Review folders… and select a folder in the top table. For each record you select under Suggested records, the preview shows its Previous path, the New path, and the binary file comparison. The File type column shows EEPROM, MAP/ORI, or MAP/MOD for files with a known role and Binary file for the others. The app can show up to 12 suggestions per folder. Hover over a shortened path to see it in full.
- Check File in existing record, File found, and Result. Selecting a suggestion displays its comparison. Click Use this record to choose it. A unique exact match may already be selected.
- To choose a different record, use Record to link to the selected folder. Use Compare with chosen record when available to check that pair. Choose a different record for each folder you want to relink. Select Skip this folder to leave it pending.
- Review the previous and new paths in the top table, then click Confirm relinking. DumpsAdvanced updates the chosen records’ folder and file links. Each record keeps its ID, notes, and history. The files stay in place.
| Result | Meaning |
|---|---|
| Identical content | The files on both sides match by content. |
| Matches saved fingerprint | The file found matches the fingerprint saved for the file in the record. |
| Different content | The file found differs from the file in the record or its saved fingerprint. |
| Content unverified | The available evidence did not settle whether the contents match. |
| File missing on one side | A binary file has no counterpart on the other side. |
Index as new… creates new records for eligible folders after confirmation, including folders flagged for review. Standard indexing skips exact duplicates. Use Confirm relinking to update existing records and avoid duplicates.
Work with a Source
Select the source row. Open Folder opens it in Windows Explorer. Actions → Check for New Dumps scans the selected source again and shows the same summary before you confirm.
Choose Actions → Fill In Missing Information when you want to fill in empty fields in the records linked to the selected source. The command can add text from associated files to Notes while preserving notes you already wrote. The original files and records linked to other sources remain intact, including separately configured subfolders and folders with the same name. Open Report to review which records and fields were updated and which sources were used.
Using Indexed Repositories and a Local Main Repository Together
For example, index 21 dumps in \\CUSTOMER-NAS\Archives\2025. The User repository — 21 indexed dumps badge appears. Then set C:\DUMPS as the main repository and choose Copy to repository when saving a new dump. The Main repository badge appears once at least one file linked to a record is present in that folder. The 21 indexed records and the new locally stored records remain accessible in the same table.
Removing a User Repository
- In the User Repositories tab, select the source from the list of configured repositories.
- In Actions, click Remove this repository…. Check the source path and the record count before confirming.
This removes the source from the list along with its [Indexed] records. You can remove a source even if it has zero referenced dumps or its folder is unavailable. The original files, records for dumps managed by the main repository, and separately configured sources and their records are preserved. This also applies to a separately configured source inside the removed folder.
To use that repository again, click Add Folder… and select its folder to index it again. If a shared catalog is available, you can also use Move to a New PC → Import Shared Catalog. Information added only to the removed records may be lost when you index the folder again.
Move the Catalog to a New PC
Open User Repositories → Move to a New PC.
Full Catalog Migration
Use full migration to restore all records on the new PC, including dumps created directly in the application.
- On the old PC, click Prepare Migration. The application creates a ZIP containing the SQLite database, the local files linked to records, and their dump folders. Network files stay on their original share.
- Install and activate DumpsAdvanced on the new PC. Click Restore Migration, open the ZIP, and choose where to store the local files.
- Review the Restore Preview. It shows the records to restore, the local files and folders, the records linked to network storage, and any missing or inaccessible paths.
After confirmation, the application backs up any active database, restores the old PC's database, and places the local files in a separate subfolder. It updates the records to point to the restored files.
Application settings and pending synchronization batches are managed separately.
Shared Catalog
Use the shared catalog to recreate the indexed records on another workstation with links to the original files.
On the main PC
- Open User Repositories.
- Select the source that corresponds to the shared archive folder, for example
\\CUSTOMER-NAS\Archives. - Go to Move to a New PC.
- Click Publish Shared Catalog.
The software creates or updates the file:
Archives\.dumpsadvanced_catalog\catalogue_indexation.json
This catalog contains the indexed dumps and their information, but it does not contain the EEPROM / FLASH / MAP files themselves.
On the new PC
- Install and activate DumpsAdvanced with the new license.
- Open User Repositories → Move to a New PC.
- Click Import Shared Catalog, pick the same shared folder as on the main PC, and confirm. This command reads the shared catalog directly from the selected folder.
The software then reads:
Archives\.dumpsadvanced_catalog\catalogue_indexation.json
It then rebuilds the local indexed dump catalog on the new workstation.
Expected result
- indexed dumps appear on the new PC;
- locally filled fields are not overwritten;
- empty fields can be completed from the catalog;
- original files remain in their network folder;
- no file is copied, moved, renamed, or deleted.
Recommendation: use the same UNC network path on all workstations, for example:
\\CUSTOMER-NAS\Archives
Avoid different mapped drives where possible, such as Z:\, as they can make path matching more difficult.
2.5 Storage / Offline and Network Synchronization
Use this mode to save dumps on your workstation and share them with other workstations through network storage. A batch stays in local staging until it can be synchronized, including when the network is unavailable.
Configure the Local and Network Folders
- Open General Settings → Storage / Offline and check Enable offline work and network storage synchronization.
- Set Local staging to a folder on this workstation and Network destination to the shared network folder. Click Test access to check access and perform a test write.
- Click Apply to save. You can select the offline save mode by default or when saving each dump. See section 4.5.
Send or Retrieve a Batch Manually
From General Settings → Storage / Offline, click Synchronize now to send pending local batches. If an upload fails, the batch stays pending and you can retry when the shared folder is available.
On another authorized workstation, click Search for new dumps to update the catalog. To retrieve a specific batch, choose Advanced actions → Import a synchronized dump… and select the batch folder on the share.
Advanced actions → Detect storage duplicates lists folders that may be duplicates. In the results, click Export report to save the list as TXT or CSV.
Automatic Synchronization and Discovery at Startup
To use automatic network operations, clear Simple local management: turn off automatic network tasks, select the startup actions you want, then click Apply.
- Try to synchronize automatically at startup attempts to send pending local batches.
- Search network storage for new dumps at startup finds newly available batches according to Received synchronized dumps.
You can enable either option on its own. When both are enabled, sending runs before discovery. Both actions run in the background after the main window opens. Results appear in the status bar.
Click Open the Storage / Offline guide for setup instructions and checks to perform on two workstations.
3. Main Interface
The main screen includes:
- a sidebar providing quick access to the software features;
- a filter and search area;
- a central table listing the dumps;
- a status bar displaying general information.
From this interface, you can:
- search for a dump;
- filter the display;
- open the detailed record;
- edit or delete a dump;
- compare two files;
- start imports or exports;
- view dumps referenced from external sources.
3.1 Storage Badges
- User repository — X indexed dumps shows the total number of indexed records. Its tooltip explains that indexed files stay in their original locations.
- Main repository — X stored dumps counts records with at least one EEPROM, MAP/ORI, or MAP/MOD file present in the configured folder. The badge appears when the count is above zero, and its tooltip shows the folder path.
Both badges can appear together. Table filters leave the totals unchanged.
On the main page, Refresh or F5 reloads the list and checks the saved paths for indexed records in the background.
- Indexed · missing files indicates an empty or missing source folder, or at least one missing file at an accessible location. Check EEPROM, MAP/ORI, and MAP/MOD to see which files are missing.
- Indexed · access unavailable indicates that a path could not be checked, for example if a network share is disconnected. Hover over the record name to see the affected paths.
The catalog keeps the records and their information in both cases. After reconnecting the storage or restoring the files, select Refresh again. See section 11 to remove a reference of your choice.
4. Creating a Dump
Access: CREATE A DUMP button
4.1 Main Information
When creating a dump, you can enter, among other things:
- manufacturer;
- model;
- module;
- customer;
- dump name.
The dump name is an essential element for easily finding your files over time.
4.2 Technical Information
Depending on your needs, you can also enter:
- VIN;
- registration number;
- ECU reference;
- protocol;
- hardware / software version;
- mileage;
- engine / gearbox information;
- free-form notes.
4.3 Associated Files
The software mainly supports:
- EEPROM;
- MAP / ORIGINAL;
- MAP / MODIFIED;
- additional text files;
- photos associated with the dump.
Editing File Links on an Indexed Record
- Right-click an [Indexed] row and choose Edit… to open Edit dump.
- In Dump files, click Browse... next to EEPROM, MAP/ORI, or MAP/MOD and select the replacement file. To clear a link, click Remove link beside it.
- Click Validate, review the summary, then choose Yes to save the links.
These actions update the catalog. The old and new files stay at their locations. Use View dump to inspect a selected file in the read-only HEX editor (section 9.1).
Verification Reads
- In Dump files, select the reference file for EEPROM, MAP/ORI, or MAP/MOD.
- Under Verification reads, choose the same file type, click Add reads…, and select one or more files. Repeat for each type you want to check.
- Select a read and click Compare reads…. The comparison opens with the reference on the left, the selected read on the right, and editing locked.
- To make the selected read the new reference for its type, click Use as reference. The previous reference moves to Verification reads on the same record.
Distinct files stay on the same record even if their contents match. Adding the same file path again keeps a single link. If two files have the same name when copied to the repository, the application gives the copies distinct names.
Click Validate to see the result for each read compared with its reference. When a read differs, Compare reads… is also available from the save confirmation. If you open the comparison from there, close it and click Validate again. Select Yes in the confirmation to save the record. After saving, you can select a read under Verification reads in the dump details and use Compare reads… there.
Add a Read to an Existing Record
With Flag identical files when saving a dump enabled (section 4.4), click Validate. If the summary finds an eligible match under Identical files on other local records, it offers Add as verification read….
- Click Add as verification read… in the save confirmation.
- Select the row for the File to attach and its Destination record. Check the Read type and the record name and number.
- Click Attach read to confirm. You can find the added file under Verification reads in the destination record’s details.
The action adds only the selected read to the existing record and keeps its reference. It does not create a new dump record. The current form stays open with the information and files you entered.
4.4 Automatic Checks
During import or creation, the software checks file sizes and extracts technical information when possible.
To control the check for identical files on other records, open General Settings → General → Dump storage, select or clear Flag identical files when saving a dump, then click Apply. The save confirmation reports reference files and verification reads of the same type and content in other local records. You can continue saving.
Verification reads on the current record are compared with their reference regardless of this setting. For incoming batches, use the separate Enable duplicate detection checkbox in Import Watch.
4.5 Creating a Dump Using Storage / Offline
Enable offline mode as described in section 2.5. If you choose a save mode for each dump, select Offline work + network sync when confirming the dump. To use offline work by default, select Work offline + sync to storage as the default save mode under General Settings → General.
The dump is created even if network storage is unavailable. Its batch stays in Local staging until synchronization succeeds. See section 2.5 for sending batches and retrieving them on another workstation.
5. Imports and Import Watch
5.1 Dump Deposit
Use Dump Deposit to add files or folders by dragging them into the application or pasting them. The window shows the intake folder path and opens the queue of batches detected by Import Watch. The save mode selected when creating the record determines where its files are kept. See section 2.2.
Protected Sources and Moving Items to Trash
The folder path shown in Dump Deposit is the location displayed on the left. Protected source indicates that the selected folder or file cannot be moved or deleted. This protection covers indexed originals and folders whose removal would also remove a source. To remove a repository from the catalog while keeping its files, open User Repositories → Actions → Remove this repository….
In a local deposit, select an eligible item and click Move to trash. Open Deposit trash in that window or TRASH in the main sidebar to find it. Commands that move or delete the folder contents are blocked for a network deposit. Remove from queue takes the batch out of the queue and leaves its files in place, including on a network share.
In a local deposit, Remove from deposit moves an eligible item to Refused watch items when the destination is on the same volume. See section 11.3 to restore an item from the trash.
5.2 Import Watch
Turn On Local Deposit Notifications
- Open General Settings → Tools → Misc Settings → Import features. Check Enable Import Watch and click Apply.
- From the main window, open Import Watch. Check Enable monitoring and select a folder on this PC under Monitored folder, for example
C:\Imports. In Monitored files, select the extensions you want to detect. - Under Notifications, check Show a notification window and click OK.
Enable duplicate detection in Import Watch controls duplicate checks for incoming batches. The check for identical files when saving a dump is in Dump storage (section 4.4).
When a Batch Arrives
Copy a file with a monitored extension or a folder containing such files into the monitored local folder. When the batch is detected, choose one of the following options.
- Process now opens the import workflow for the batch.
- Keep in queue leaves the batch in the Import queue for later processing.
- Ignore removes the batch from the queue and remembers your choice. The files stay where you copied them.
At Startup
When Import Watch is enabled, it scans the monitored folder in the background at startup. You can keep using the main window during the scan. Click Cancel or close the scan window to pause Import Watch for the current session. Your saved setting is preserved.
If batches are waiting after the scan, the reminder shows how many. It works with a local monitored folder or a network share and includes batches added while the application was closed. Choose View batches to open the queue or Later to leave the batches there.
The reminder is on by default for new installations. On an existing installation, it follows Show a notification window until you first save the new option. To turn the reminder off, open Import Watch → Notifications, clear Show a reminder for pending batches at startup, and click OK. Once saved, this setting is independent of the notifications for new batches in a local folder.
Silent mode hides the reminder. If a batch from the network folder opens automatically at startup, the reminder covers only the other batches that are waiting.
The badge on Dump Deposit shows the number of detected batches waiting, even when the reminder is off. From the main window, open Dump Deposit → Import queue, select a batch, and click Process. The queue is available with Enable Import Watch checked, even if Enable Dump Deposit is unchecked. Detected batches appear there even when notification pop-ups are off.
5.3 Enable or Disable Import Features
Open General Settings → Tools → Misc Settings → Import features to choose the import features you use.
- Enable Import Watch enables monitoring of the configured folder when Enable monitoring is checked in Import Watch.
- Enable Dump Deposit enables manual drag-and-drop and paste operations in the application.
Click Apply to save the changes. You can still access indexed dumps and save new dumps to the main repository.
6. Search, Filtering, and Vehicle Index
6.1 Quick Search
Quick Search applies instant filtering to the main table.
6.2 Available Filters
You can filter the list using various criteria, for example:
- dump name;
- manufacturer;
- model;
- VIN;
- registration number;
- customer;
- dates.
6.3 Advanced Search
Advanced Search allows you to refine the display using several combined criteria in order to find a specific dump more quickly.
6.4 Plate Lookup
Open Plate lookup from the main window. Enter a French plate number with or without hyphens, then click Search. Use Create a dump for this vehicle to open a dump form with the returned vehicle details filled in. Workshop note lets you keep a note for that plate on this computer.
Open Service status and click Test connection to check access to the lookup service. Refresh credits updates the balance shown in the search window.
6.5 Vehicle Index
In the main window sidebar, click VEHICLE INDEX, just below PLATE LOOKUP. Use this reference catalog to look up associations between vehicles, engines and ECUs.
Vehicle Index opens in a separate window. Minimize or resize it to keep working in the main dump list. Click VEHICLE INDEX again in the sidebar to bring the window to the front and return to your search.
- Enter a vehicle name, power rating, or ECU reference in the same search field. For example,
Golf 210finds 210 hp Golf engines, andClio EDC17C84combines a vehicle model with an ECU reference. - Results update as you type. Open Refine to use the optional Category, Make, Model, Generation, and Engine filters. For example, type
volkin Make and choose Volkswagen. Click the cross on a filter to remove it. - Select an engine from the results. The panel on the right shows the vehicle, its generation, and the associated ECUs, including alternative labels where available. If you entered a reference, the details indicate which ECUs match.
The Engine ECU (indicative) label describes the module type according to the catalog. Check the reference on the ECU fitted to the vehicle to confirm the match.
Compare two engines
- Check the boxes beside two engines in the results. You can select the engines in different searches. To replace a choice, uncheck its row or click the cross beside its name.
- When the counter shows Engines selected · 2/2, click Compare. In common shows the labels shared by both engines. The two groups marked only list the labels specific to each engine. The comparison uses the full ECU list for each engine, even when the search includes an ECU reference.
- Click Grouped label variants to see the original spellings in a group. The counts are for labels in the reference catalog. Typographic variants of the same label count once, such as
BOSCH - EDC17C84andBOSCH EDC17C84. Distinct ECU codes are counted separately.
For example, comparing the Renault Clio IV 1.5 dCi 75 hp and 90 hp for 2012–2016 gives 3 labels under In common, 6 under 75 hp only, and 1 under 90 hp only.
Click Back to search to return to the results with both engines still checked.
Find saved dumps
- By ECU model or reference. Enter only the ECU model or its full reference, for example
EDC16C35. The code alone is enough to show exact matches automatically in My dumps. - From a vehicle. Click an engine or ECU to update My dumps from that selection, even after searching by reference alone. Records can match the engine shown, the selected ECU, or both. If the search field contains only a reference, press Enter in that field to return to exact matches.
Each match shows why the record was found, such as Same engine, Same ECU model, or Same ECU reference. Select a row and click Open record to view the dump record.
Create a record
Select an engine and, if you want to include it, an ECU. If any engines are checked for comparison, display one of those engines or clear all the checkboxes to use a different engine. Click Create a record in the right-hand panel to open the prefilled form.
- Vehicle type uses the catalog category. The form includes Motorcycle, Quad, and Bus.
- The catalog generation period, such as 2006–2010, appears separately. Enter the vehicle’s exact year in Year.
- Engine code is filled in only when a single code is confirmed. The field stays empty if the description contains several codes or if a code cannot be confirmed.
- DIN HP uses the catalog’s power figure. If the figure is missing or zero, the form can use a clear power value at the end of the engine description, such as 146 hp in 3.0 HPI 146 hp.
- Gearbox type uses an explicit designation such as EAT8 or BVA for an automatic gearbox, or BVM for a manual gearbox. If the description is ambiguous, choose the gearbox type yourself.
Displacement uses the exact value in cm³ when available. When the engine description provides only a nominal value, the field shows it in liters, for example 3.0 L. The tooltip explains where the value comes from, and the unit is kept when the record is saved. If the description is ambiguous, the field stays empty.
The Fuel type field keeps any value already entered. If the field is empty, the form uses the catalog value when available. Otherwise, it uses a clear designation in the engine description.
- GPL and LPG fill in LPG. GNV, CNG, G-TEC, and G-Tron fill in the dedicated CNG option.
- Électrique, Electric, or BEV fills in Electric.
- HDi Hybrid4, MHEV, and Mild Hybrid fill in Hybrid.
- An E85 designation, such as TSI E85, fills in E85.
With a plain engine description, TDI, HDi, and dCi fill in Diesel, while TSI and TFSI fill in Petrol. The words Diesel, Essence, Petrol, and Gasoline are also recognized when they clearly indicate the fuel type. The tooltip shows what was recognized. The field stays empty when the description is ambiguous, for example e-tron or 48 V alone, or when more than one designation applies, such as Hybrid and E85 together.
The selected ECU can fill in ECU brand and ECU model. If the brand is missing, the form uses the saved association when the exact model matches a single brand. ECU ref is filled in only when one part number is explicitly identifiable.
Module suggests ECU MOTEUR for an ECU classified as an engine controller and TCU for one classified as a transmission controller. If the type is unknown or no ECU is selected, choose the module yourself.
Review the fields, complete the record, add your files, then click Validate to continue saving.
Type in uppercase
Go to GENERAL SETTINGS → Tools → DUMP SETTINGS. Select Force uppercase in Vehicle Index, then click Apply. The checkbox is cleared by default. Selecting it converts text in the search bar to uppercase. Searching for edc16c35 and EDC16C35 gives the same results.
7. Detailed Dump Record
Access: double-click a row
The detailed record allows you to view:
- all dump metadata;
- associated files;
- notes;
- linked images;
- source information if the dump comes from a referenced source.
Depending on the context, quick actions are available to:
- open the dump folder;
- open an associated file;
- open the referenced source;
- view the full details of the linked folder.
Use Edit… on an [Indexed] row to change the record's details or update its file links as described in section 4.3. To keep a copy in the main repository, create a new record and choose Copy to repository.
8. File Comparison
From the main list, you can compare two dumps when the required files are available.
Available comparisons:
- EEPROM;
- MAP / ORIGINAL;
- MAP / MODIFIED.
The comparison view shows:
- offsets;
- left-side and right-side values;
- modified areas;
- structural differences between two files.
8.1 Track Differences as You Edit
When you edit a byte in the left or right pane, the Differences counter and the Detailed Differences tab update automatically. As soon as the values match at the same offset, the difference disappears. With Differences Only enabled, a row disappears when its last difference is corrected.
The read-only XOR column in Detailed Differences shows which bits differ between the left and right bytes at each listed offset. Each 1 bit in the result marks a difference. For example, AA and A2 give 08, which marks one differing bit. -- means a byte is missing on one side.
Use Export Report to generate a report for the active comparison range, including unsaved edits. Recalculate Differences lets you rerun the comparison for that range on demand.
8.2 Extract the Same Range from Both Dumps
- In the Comparison tab, enter the two offsets in Start and End, using
0xfor hexadecimal values. To use a selection, leave both fields empty and select a continuous range of bytes in one HEX pane. - Click Extract Range… and choose a destination folder. Both endpoints are included, and the entire range must exist in both dumps.
- The editor saves two
.binfiles in the selected folder, one for each pane. For example,0x10through0x1Fproduces0x10-0x1F_left.binand0x10-0x1F_right.bin, each containing 16 bytes. Choose another folder if either filename already exists.
Each extract contains the current bytes from its pane, including unsaved edits. Extraction also works with editing locked and leaves the source files intact.
9. HEX Editor
9.1 Built-in HEX Editor
The software includes a HEX editor designed for viewing and making controlled changes to files.
On first use, the editor opens in Simple mode with Quick Guide expanded. It shows how to open or drag in a file, find and edit a byte, and save your work. Click Quick Guide to collapse the steps and make more room for the grid, or click it again to expand them. The editor remembers the guide state and the last mode separately.
- Simple provides the HEX and ASCII grid, text search, navigation by offset, and tools to copy or extract selected bytes and to undo or redo edits.
- Expert adds the Text or HEX search selector, Block Editing for pasting, filling or applying XOR, and Bookmarks and Zones to manage bookmarks and zones and jump between edits. Edit Differences shows the bytes changed in the current file since you opened it or last saved it.
Switching modes preserves the open file, current offset, selection and unsaved edits. The Text and HEX search fields each keep their own search pattern when you switch modes.
In an editable session, Save creates a backup copy before writing changes to the current file. Save As… saves and opens an independent copy. The File Actions menu also provides Reload and Open in External Editor.
From Edit dump on an indexed record, View dump opens the built-in HEX editor in read-only mode to protect the source file. You can navigate by offset, search the file, and use Copy or Extract on selected bytes. Extract saves the selection to a separate .bin file.
9.2 External HEX Editor
Open General Settings → General → External HEX editor. Select the editor executable, such as HxD or 010 Editor, in Executable. Click Test to check the file path, then click Apply.
10. Exports and Sales Dashboard
10.1 Export Dumps
The software can export:
- complete files in ZIP format;
- metadata in CSV format.
The export can be applied to:
- the current selection;
- or all displayed dumps.
10.2 Sales Dashboard
The Sales Dashboard view allows you to monitor commercial activity related to dumps that have a price assigned.
It brings together the main sales analysis tools in a single window.
Available Features
- Period filters: today, 7 days, 30 days, current month, current year, all, or custom period;
- Business filters: payment status, invoicing status,
Standard/Othertype, and text search; - Quick indicators: total revenue, amount collected, amount outstanding, number of invoiced dumps, average order value, and oldest unpaid item;
- Detailed table: list of visible sales with creation date, payment date, dump, customer, manufacturer, module, registration number, price, deposit, outstanding balance, payment, invoicing, and type;
- Trend chart: daily, weekly, monthly, or yearly view showing total revenue, amount collected, and amount outstanding;
- Top customers: ranking of customers generating the highest revenue in the filtered view;
- Exports: CSV for the current view. PDF for the current view, selected sales, or visible unpaid sales.
Calculation Logic
The Sales Dashboard distinguishes the sale from the payment receipt in order to maintain clear and consistent accounting information.
- Total revenue: linked to the dump creation date;
- Collected: linked to the actual payment date when the dump is marked as paid;
- Outstanding: corresponds to the remaining balance due;
- Deposit: included in the total price and deducted from the outstanding balance.
Example:
- dump created on
09/04/2026with a price of€780; - dump paid on
10/04/2026.
Result:
- total revenue is recorded on
09/04/2026; - the collected amount appears on
10/04/2026; - the outstanding balance becomes
€0once the payment is recorded.
Reading the Detailed Table
The detailed table displays, among other things:
- the dump creation date;
- the payment date in the
Payment datecolumn when available; - the price;
- the deposit;
- the outstanding balance;
- the Payment, Invoicing, and Type statuses.
When the dump is marked as paid, the payment status may also display additional information in a tooltip.
Reading the Chart
The chart provides a summary view by day, week, month, or year.
Each column can display a tooltip when hovered over, showing:
- the relevant period;
- total revenue;
- the amount collected;
- the amount outstanding.
The data series follow this logic:
- Total revenue: dump creation date;
- Collected: actual payment date;
- Outstanding: remaining balance due.
As a result, revenue may appear on one date and its payment may appear on a later date within the same reporting period.
How Period Filters Work
A row may appear in the filtered view if:
- its creation date falls within the selected period;
- or its payment date falls within that period.
This logic prevents a payment received after the initial creation of the dump from being excluded from the analysis.
CSV Exports
The Sales Dashboard CSV includes a payment_date column. It contains the payment date when that date has been recorded.
Key Points
- all indicators displayed in this window follow the active filters;
- double-clicking a sales row opens the detailed record of the relevant dump;
- dumps marked as
Quoteare excluded from revenue calculations.
11. Trash and Removing Records
On the main page, select the relevant records and use the trash command in their context menu.
11.1 Removing Indexed Records
Moving an [Indexed] record to the trash removes its reference from the catalog and keeps the original files. To remove several references, select the relevant rows before using the command. When a selection includes an indexed record, only the selected records are placed in the trash.
To remove an entire repository from the catalog while keeping its files, use User Repositories → Actions → Remove this repository…. See “Removing a User Repository” in section 2.4.
11.2 Moving a Record and Its Local Files to Trash
For a record that uses a working folder managed by DumpsAdvanced, select Also move managed local files to the trash to move its files with it. Leave it clear to remove only the record. The app blocks the operation if the files are on a network share or cannot be moved reversibly.
11.3 Restoring or Permanently Deleting Items
Open TRASH in the sidebar. To select multiple records, files, or folders, use Ctrl+click for separate rows or Shift+click for a range. Click Select all or press Ctrl+A to select the entire list.
Click Restore to process the selection and follow its progress. If an item cannot be restored, it stays in the trash while the remaining items are processed. Files that were moved together with a record are returned to their original locations before the record reappears in the catalog. Entries marked Deletion incomplete are excluded from restoration.
If the original name is already in use, the app offers a different name for a file or folder moved to the trash separately. For a record with files, restoration preserves what is already at the destination. Free the affected location before trying again.
To erase the selection, click Delete permanently…. The confirmation dialog shows how many items will be deleted and asks you to confirm once. Entries marked Interrupted operation remain in the trash for restoration.
For a folder removed outside this trash, check the recovery options for the original storage, such as its recycle bin, snapshots, or an available backup.
12. Settings and Maintenance
12.1 User Access
Open General Settings → Access to set up password protection. Allow guest mode (read-only) lets users open the application with read-only access.
12.2 Maintenance
Open General Settings → Data & Maintenance to manage backups, restore the database or check its integrity.
- Under On exit, choose whether to disable automatic backups, keep a SQLite copy, create a full ZIP, or save both. Select a folder on another drive or a NAS, set retention, and click Apply.
- Back up now… shows the backup type and destination in the same window. A Full backup includes the database, local files linked to dumps, and settings. Files already on a network share stay there. If you choose another destination here, it applies to this backup. The periodic reminder under Tools → Misc Settings opens the same dialog.
- The list shows the type, date, and filename of SQLite copies and ZIPs in the displayed folder. Restore a backup… identifies the selected file and previews what it will recover or replace. A full restore backs up the active database, applies the settings, and updates links to the restored local files. After any restore that replaces the database, click OK in the completion message to restart DumpsAdvanced automatically. Activation and security credentials are managed on the destination PC.
- Use Advanced actions → Archive a repository or another folder… to copy an entire folder and choose ZIP compression. Purge old backups lists the files for confirmation before deleting them.
- Locate active database selects the active
.dbfile in Windows Explorer. Check database integrity runs the SQLite check. Under Journal / Logs, click Open logs folder to view the log files.
Storage settings are covered in section 2, and import settings are covered in section 5.
12.3 Updates
Open General Settings → Update to see your installed version and build. Click Check for updates to compare it with the published version. If the button shows Update [1], click it for details. View detailed release notes opens the published notes when available.
Use Open download page when your license has been granted access to that page. Before installing an update, back up your database and repository through Data & Maintenance, then close DumpsAdvanced.
12.4 License
Open General Settings → License to review License status. If your provider asks you to change the key, select the confirmation checkbox to unlock the License key field, enter the key, and click Test / Activate in Online license. The result appears in the status area and in a message after the check.
If this computer lacks Internet access, click Request an offline license. You can copy its HWID or use a link or QR code on a device connected to the Internet.
13. History and Traceability
The software keeps a history of the main actions in order to make operations easier to track.
The history may display:
- the date and time;
- the action performed;
- the relevant target;
- a summary of the operation.
14. Best Practices
For reliable long-term professional use, it is recommended to:
- clearly define the main repository before carrying out bulk imports;
- use User Repositories to reference archives in place;
- index customer subfolders progressively, for example by year, vehicle, or manufacturer;
- disable Dump Deposit and Import Watch if you do not use them;
- use clear and consistent dump names;
- check for duplicates before confirming an operation;
- keep regular backups;
- document important changes in the notes;
- periodically check the availability of referenced sources.
15. Support
Main contact: dumpsadvanced@gmail.com
When requesting support, it is recommended to provide:
- a precise description of the problem;
- screenshots or examples where possible;
- any relevant logs;
- the software version being used.
In General Settings → Remote Support, use Detect automatically or Browse… to find AnyDesk.exe, then click Launch AnyDesk. Download AnyDesk opens the official Windows download page.
Click Prepare logs to send to save a ZIP file you can attach to your support request. Open logs folder opens the main DumpsAdvanced logs folder.
Appendix · End User License Agreement
This appendix reproduces the source document and contains fields to be completed.
END USER LICENSE AGREEMENT — DUMPSADVANCED
1. Parties and Acceptance
This agreement is entered into between you (the user) and [MOI SETUP2B]. By installing, copying, or using DumpsAdvanced, you agree to the terms of this agreement.
2. License Grant
[MOI SETUP2B] grants you a non-exclusive, non-transferable, and revocable license to use one copy of the software on devices under your control, in accordance with this agreement.
3. Restrictions of Use
Unless expressly authorized in writing, you may not:
- reproduce or distribute the software for commercial purposes;
- decompile, disassemble, or attempt to obtain the source code;
- bypass protection mechanisms;
- remove or modify copyright notices.
Any breach of these restrictions will automatically terminate your license.
4. Data and Privacy
The software may collect technical data (logs) required for operation and service improvement. The purposes, retention periods, and access rights are described in the privacy policy available through the Help menu.
For any questions: dumpsadvanced@gmail.com
5. Updates and Support
[MOI SETUP2B] may provide updates and fixes. Support and update frequency are provided in accordance with the current commercial policy.
6. Limited Warranty
Except where mandatory legal provisions apply, the software is provided “as is” without warranty of any kind. [MOI SETUP2B] does not guarantee that it is suitable for any particular purpose.
7. Limitation of Liability
To the extent permitted by law, the liability of [MOI SETUP2B] for any direct, indirect, incidental, or consequential damage related to the use of the software is limited to the amount paid for the license, where applicable, or to zero if the software is distributed free of charge.
8. Termination
This agreement terminates automatically if its terms are breached. After termination, you must stop using the software and destroy all copies of it.
9. Governing Law and Jurisdiction
This agreement is governed by French law. Any dispute shall be submitted to the competent courts of [VILLE], France.
10. Miscellaneous
If any provision is found to be invalid, the remaining provisions will remain in force. Any changes to this agreement must be made in writing and signed by [MOI SETUP2B].
Contact and Support
- [SETUP2B]
- Support / Contact:
dumpsadvanced@gmail.com